Products Minto GWPMEX Series GWPMEX Series

GWPMEX Series
Unarmoured Extended Tail Glands


For Explosion Protected Unarmoured Cable Applications
Nickel plated brass cable glands for use with circular unarmoured cables to secure the cable and to provide an Explosion Protected, Weatherproof and Dust Excluding Ignition Proof entry into panels or enclosures that meet these requirements. Gland has extended tail for conduit or hose termination.

The cable glands in this range are suitable for use in machine and equipment applications where an Explosion Protected, unarmoured, Weatherproof gland type termination, with mechanical protection is required.

Table 1

Part Number Range Min. Range Max. Dia. Across Corners Across Flats Max. Protrusion Entry Thread Length Tail Length Tail Dia. Pack Units Sealing Washer Locknut Earth Tag
GWPMEX0
3.0 7.1 M20x1.5 25.9 22.3 49.3 13 16.7 15.9 16 W20 PLN20 ET20
GWPMEX1
6.5 9.5 M20x1.5 25.9 22.3 49.3 13 16.7 15.9 16 W20 PLN20 ET20
GWPMEX1A
9.0 11.9 M20x1.5 29.7 25.6 49.6 13 16.7 15.9 10 W20 PLN20 ET20
GWPMEX1B-25
11.5 14.3 M25x1.5 33.1 28.5 53.6 15 20.7 19.1 10 W25 PLN25 ET25
GWPMEX2
13.5 17.5 M25x1.5 36.1 33.3 63.4 15 27.2 25.4 5 W25 PLN25 ET25
GWPMEX2A-32
17.0 20.1 M32x1.5 40.4 37.2 64.8 21 27.2 25.4 5 W32 PLN32 ET32
GWPMEX3
19.5 23.8 M32x1.5 48.2 44.4 73.7 21 33.7 31.8 4 W32 PLN32 ET32
GWPMEX3A
22.5 27.0 M32x1.5 48.2 44.4 73.7 21 33.7 31.8 4 W32 PLN32 ET32
GWPMEX4
26.0 29.4 M40x1.5 61.3 56.5 81.5 21 41.5 38.1 1 W40 PLN40 ET40
GWPMEX4A
28.5 32.5 M40x1.5 61.3 56.5 81.5 21 41.5 38.1 1 W40 PLN40 ET40
GWPMEX5
31.0 36.5 M50x1.5 73.9 68.2 98.0 21 54.7 50.8 1 W50 PLN50 ET50
GWPMEX5A
35.0 40.5 M50x1.5 73.9 68.2 98.0 21 54.7 50.8 1 W50 PLN50 ET50
GWPMEX5B
39.5 43.8 M50x1.5 73.9 68.2 98.0 21 54.7 50.8 1 W50 PLN50 ET50
GWPMEX6
42.5 48.4 M63x1.5 87.7 80.9 113.6 22 70.2 63.5 1 W63 PLN63 ET63
GWPMEX6A
47.0 52.4 M63x1.5 87.7 80.9 113.6 22 70.2 63.5 1 W63 PLN63 ET63
GWPMEX6B
51.0 56.0 M63x1.5 87.7 80.9 113.6 22 70.2 63.5 1 W63 PLN63 ET63
GWPMEX7A
55.0 59.3 M75x1.5 99.7 92.0 134.8 24 91.4 76.2 1 W75 PLN75 ET75
GWPMEX7B
58.0 62.6 M75x1.5 99.7 92.0 134.8 24 91.4 76.2 1 W75 PLN75 ET75
GWPMEX7C
61.0 65.9 M75x1.5 99.7 92.0 134.8 24 91.4 76.2 1 W75 PLN75 ET75

Fitting Instructions
Contact CMI Electrical for Fitting Instructions

Certifications
Compliance:Explosion protected to IEC60079 Series
Protection:         Ex db I/IIC, Ex eb I/IIC, Ex ta IIIC
Materials:Brass Nickle Plated / Neoprene / Nylon
IP Rating:IP66/68 (7 Metres for 1 Hour)

Note: For compliance to IP68 rating, the approved sealing washer
must be installed onto the entry thread