Products Minto GWPMSS Series GWPMSS Series

GWPMSS Series
Stainless Steel Unarmoured Glands


For Explosion Protected, Unarmoured Cable Applications
Stainless Steel cable glands for use with circular unarmoured cables to secure the cable and to provide an Explosion Protected, Weatherproof and Dust Excluding Ignition Proof entry into panels or enclosures that meet these requirements.

The cable glands in this range are suitable for use in machine and equipment applications where an Explosion Protected, unarmoured, Weatherproof gland type termination is required.

Table 1

Part Number Range Min. Range Max. Dia. Across Corners Across Flats Max. Protrusion Entry Thread Length Shroud Pack Units Sealing Washer Locknut Earth Tag
GWPM0SS
3.0 7.1 M20x1.5 25.9 22.3 29.5 13 SHR-1 16 W20 PLN20 ET20
GWPM1SS
6.5 9.5 M20x1.5 25.9 22.3 29.5 13 SHR-1 16 W20 PLN20 ET20
GWPM1ASS
9.0 11.9 M20x1.5 29.7 25.6 29.8 13 SHR-1 20 W20 PLN20 ET20
GWPM1BSS
11.5 14.3 M20x1.5 33.1 28.5 29.8 13 SHR-2 20 W20 PLN20 ET20
GWPM2SS
13.5 17.5 M25x1.5 36.1 33.3 31.7 15 SHR-3 12 W25 PLN25 ET25
GWPM2ASS
17.0 20.1 M25x1.5 40.4 37.2 33.1 15 SHR-3 12 W25 PLN25 ET25
GWPM3SS
19.5 23.8 M32x1.5 48.2 44.4 34.0 21 SHR-4 4 W32 PLN32 ET32
GWPM3ASS
22.5 27.0 M32x1.5 48.2 44.4 34.0 21 SHR-4 4 W32 PLN32 ET32
GWPM4SS
26.0 29.4 M40x1.5 61.3 56.5 34.0 21 SHR-6 4 W40 PLN40 ET40
GWPM4ASS
28.5 32.5 M40x1.5 61.3 56.5 34.0 21 SHR-6 4 W40 PLN40 ET40
GWPM5SS
31.0 36.5 M50x1.5 73.9 68.2 36.2 21 SHR-7 2 W50 PLN50 ET50
GWPM5ASS
35.0 40.5 M50x1.5 73.9 68.2 36.2 21 SHR-7 2 W50 PLN50 ET50
GWPM5BSS
39.5 43.8 M50x1.5 73.9 68.2 36.2 21 SHR-7 2 W50 PLN50 ET50
GWPM6SS
42.5 48.4 M63x1.5 87.7 80.9 37.5 22 SHR-8 1 W63 PLN63 ET63
GWPM6ASS
47.0 52.4 M63x1.5 87.7 80.9 37.5 22 SHR-8 1 W63 PLN63 ET63
GWPM6BSS
51.0 56.0 M63x1.5 87.7 80.9 37.5 22 SHR-8 1 W63 PLN63 ET63
GWPM7ASS
55.0 59.3 M75x1.5 99.7 92.0 40.5 24 SHR-9 1 W75 PLN75 ET75
GWPM7BSS
58.0 62.6 M75x1.5 99.7 92.0 40.5 24 SHR-9 1 W75 PLN75 ET75
GWPM7CSS
61.0 65.9 M75x1.5 99.7 92.0 40.8 24 SHR-9 1 W75 PLN75 ET75
GWPM8ASS
64.0 69.1 M85x2.0 112.6 104.0 40.8 24 NA 1 W85 PLN85 ET85
GWPM8BSS
67.5 72.3 M85x2.0 112.6 104.0 40.8 24 NA 1 W85 PLN85 ET85
GWPM8CSS
69.5 75.5 M85x2.0 112.6 104.0 40.8 24 NA 1 W85 PLN85 ET85
GWPM8DSS
74.0 78.6 M85x2.0 112.6 104.0 40.8 24 NA 1 W85 PLN85 ET85
GWPM9ASS
77.0 81.8 M95x2.0 127.2 117.5 40.8 24 NA 1 W95 PLN95 ET95
GWPM9BSS
80.0 85.0 M95x2.0 127.2 117.5 40.8 24 NA 1 W95 PLN95 ET95
GWPM9CSS
83.0 88.2 M95x2.0 127.2 117.5 40.8 24 NA 1 W95 PLN95 ET95

Fitting Instructions
Contact CMI Electrical for Fitting Instructions

Certifications
Compliance: Explosion protected to IEC60079 Series
Protection:          Ex db I/IIC, Ex eb I/IIC, Ex ta IIIC
Materials:Stainless Steel / Neoprene / Nylon
IP Rating:IP66/68 (7 Metres for 1 Hour)

Note: For compliance to IP68 rating, the approved sealing washer
must be installed onto the entry thread