Products Minto GWPM Series GWPM Series

GWPM Series
Unarmoured Glands


For Explosion Protected, Unarmoured Cable Applications
Nickel plated brass cable glands for use with circular unarmoured cables to secure the cable and to provide an Explosion Protected, Weatherproof and Dust Excluding Ignition Proof entry into panels or enclosures that meet these requirements.

The cable glands in this range are suitable for use in machine and equipment applications where an Explosion Protected, unarmoured, Weatherproof gland type termination is required.

Table 1

Part Number Range Min. Range Max. Dia. Across Corners Across Flats Max. Protrusion Entry Thread Length Shroud Pack Units Sealing Washer Locknut Earth Tag
GWPM0
3.0 7.1 M20x1.5 25.9 22.3 29.5 13 SHR-1 16 W20 PLN20 ET20
GWPM1
6.5 9.5 M20x1.5 25.9 22.3 29.5 13 SHR-1 16 W20 PLN20 ET20
GWPM1A
9.0 11.9 M20x1.5 29.7 25.6 29.8 13 SHR-1 20 W20 PLN20 ET20
GWPM1B-25
11.5 14.3 M25x1.5 33.1 28.5 29.8 15 SHR-2 20 W25 PLN25 ET25
GWPM2
13.5 17.5 M25x1.5 36.1 33.3 31.7 15 SHR-3 12 W25 PLN25 ET25
GWPM2A-32
17.0 20.1 M32x1.5 40.4 37.2 33.1 21 SHR-3 12 W32 PLN32 ET32
GWPM3
19.5 23.8 M32x1.5 48.2 44.4 34.0 21 SHR-4 4 W32 PLN32 ET32
GWPM3A
22.5 27.0 M32x1.5 48.2 44.4 34.0 21 SHR-4 4 W32 PLN32 ET32
GWPM4
26.0 29.4 M40x1.5 61.3 56.5 34.0 21 SHR-6 4 W40 PLN40 ET40
GWPM4A
28.5 32.5 M40x1.5 61.3 56.5 34.0 21 SHR-6 4 W40 PLN40 ET40
GWPM5
31.0 36.5 M50x1.5 73.9 68.2 36.2 21 SHR-7 2 W50 PLN50 ET50
GWPM5A
35.0 40.5 M50x1.5 73.9 68.2 36.2 21 SHR-7 2 W50 PLN50 ET50
GWPM5B
39.5 43.8 M50x1.5 73.9 68.2 36.2 21 SHR-7 2 W50 PLN50 ET50
GWPM6
42.5 48.4 M63x1.5 87.7 80.9 37.5 22 SHR-8 1 W63 PLN63 ET63
GWPM6A
47.0 52.4 M63x1.5 87.7 80.9 37.5 22 SHR-8 1 W63 PLN63 ET63
GWPM6B
51.0 56.0 M63x1.5 87.7 80.9 37.5 22 SHR-8 1 W63 PLN63 ET63
GWPM7A
55.0 59.3 M75x1.5 99.7 92.0 40.5 24 SHR-9 1 W75 PLN75 ET75
GWPM7B
58.0 62.6 M75x1.5 99.7 92.0 40.5 24 SHR-9 1 W75 PLN75 ET75
GWPM7C
61.0 65.9 M75x1.5 99.7 92.0 40.5 24 SHR-9 1 W75 PLN75 ET75
GWPM8A
64.0 69.1 M85x2.0 112.6 104.0 40.8 24 NA 1 W85 PLN85 ET88
GWPM8B
67.5 72.3 M85x2.0 112.6 104.0 40.8 24 NA 1 W85 PLN85 ET88
GWPM8C
69.5 75.5 M85x2.0 112.6 104.0 40.8 24 NA 1 W85 PLN85 ET88
GWPM8D
74.0 78.6 M85x2.0 112.6 104.0 40.8 24 NA 1 W85 PLN85 ET88
GWPM9A
77.0 81.8 M95x2.0 127.2 117.5 40.8 24 NA 1 W95 PLN95 ET102
GWPM9B
80.0 85.0 M95x2.0 127.2 117.5 40.8 24 NA 1 W95 PLN95 ET102
GWPM9C
83.0 88.2 M95x2.0 127.2 117.5 40.8 24 NA 1 W95 PLN95 ET102

Fitting Instructions
Contact CMI Electrical for Fitting Instructions

Certifications
Compliance:Explosion protected to IEC60079 Series
Protection:         Ex db I/IIC, Ex eb I/IIC, Ex ta IIIC
Materials:Brass Nickle Plated / Neoprene / Nylon
IP Rating:IP66/68 (7 Metres for 1 Hour)

Note: For compliance to IP68 rating, the approved sealing washer
must be installed onto the entry thread